News

Home / News / Industry News / Use A Belt Dressing To Maintain The V Ribbed Belt

Use A Belt Dressing To Maintain The V Ribbed Belt

Update:26-10-2017
Summary:

A belt dressing or belt conditioner is a sprayer for au […]

A belt dressing or belt conditioner is a sprayer for automotive V Ribbed Belt. Spray the tape with a softening rubber to prevent it from drying and sliding. You can use lawn mower drives and deck belts, tillers, tractors and car belts to maintain their viscosity and extend their service life. It also prevents and stops the screams caused by the slip belt.

Sometimes, depending on the squeaky cause, the belt dressing is intended as a tool to help you keep your v ribbed belt. For all the squeak, it is not easy. If your belt slips as the rubber begins to dry, the belt conditioner stops squeak by softening and moisturizing. If the belt is dry, double-sided the belt and immerse it in the belt and spray it. Once you put the belt back, the squeak seems to be more loud than before, but when you drive, it will begin to disappear.

However, more reason than drying is squeaky. Applying the belt dressing is the first fix you should try if you have a creaky belt. At first it may work, but if the squeak sounded, your tension wheel may be misaligned, or one of the pulleys may wear. In these cases, the belt dressing will not be fixed squeaky. To check your pulley bearing, you must remove the serpentine belt and turn each pulley by hand. All pulleys should be free to rotate.

If you are in conflict with one of them, it means that you should replace it. If all the pulleys are easy to rotate, or if you replace a viscous pulley and the squeak is still there, it is likely that the pulley will not be aligned. If this is the case, you should ship your car or truck to a professional service technician to check the pulley.