Home / News / Industry News / The Automotive V Belts Provide Friction Effects

The Automotive V Belts Provide Friction Effects


The Automotive V Belts of the car provides the friction […]

The Automotive V Belts of the car provides the friction effect, plus the mechanical advantages of the wedge-shaped principle (most of the surface area of the belt on the belt seat). Appropriate tension and pulleys are critical to the pulley positioning and require a long and satisfying operation. Tension is too small to cause slippage, causing the belt and belt to wear prematurely. Too much tension causes the belt, the bearing and the (motor and fan) shaft to stress too much. However, the belt will be satisfactorily operated and there is still a wide range of tensions. The intention is to find the appropriate range for any V-belt drive. Be sure to consult the owner's guide to get the correct range of tension.

Everyone hates the noise. If your fan system squeaks, the root cause may be belt wear, the belt is too loose, the belt type is not correct, the belt is of poor quality, the belt has oil, the pulley bearing is bad, the wear idler pulley, the motor is bad, or the belt is not alignment. The belt should always be seated and aligned with the center of each pulley.

One of the advantages of automotive V belt systems is that they are one of the most silent, efficient and durable transmission systems and one of the least needed systems. Proper inspection of the service period will ensure system efficiency. In other blogs, we have already mentioned the possible impact of other factors on the V-band system, but we have little to say about the slot situation and how we can determine if there is a need for our attention.

In the case of high power demand, you can side by side combination of more than two automotive V belts. According to V-belt manufacturers, these belts may be completely rubber or polymer, or may be fixed in rubber or polymer fibers to provide power and fortification. Of course, the fibers may be fabric materials such as cotton, nylon or polyester, or the strongest steel. Their design and development approach allows them to provide a simplified installation process and greater environmental flexibility. In order to obtain high quality automotive V-belt, South African V pulley suppliers are good at providing the best products. Professional and technical personnel efforts are very vigilant, these technical staff is very alert to the development of power products. They are also pocket-friendly prices.